Posted on

Fat Ghost Upper Receiver – M10 9mm or 45 acp.

Like the original, The Grey Ghost, the Fat Ghost is a modification of the design by Mike McManus.  It is completely made of steel with full length Picatinny Rail on top, an Ace Style grip out front, a flash hider with a stubby 1/2 x 28 tpi threaded barrel for the M10/9 and 5/8 x 24 for the M10/45, “shark fin” non-reciprocating charging handle, and built in gas deflector.  The cost of the “stock” Fat Ghost is $475.00.

Some of the customize-able options are below:

1.  Change the barrel threading to :  M10/45 – .578 x 28 tpi, Standard barrel, Standard barrel but made stubby (no barrel after threads).  M10/9 – Standard barrel, Standard barrel but made stubby (no barrel after threads).
2.  Your own barrel such as a 3-lug. Subtract $30.
4.  3″ side accessory rail. Add $55.
5.  Low profile (round/cylindrical) charging handle instead of the shark fin.  Same price.
6.  Leave off the flash hider.  Subtract $5.
The picture below is of the Fat Ghost Upper Receivers with each of the optional charging handles and showing the standard 9mm barrel or the stubby 9mm barrel (the flash hider has been left off of each).  The charging handle on the top Fat Ghost is the Low Profile Charging Handle, and the Charging Handle on the botttom Fat Ghost is the Shark Fin Charging Handle.

 

 

This picture shows the Fat Ghost with the Low Profile Charging Handle and the stubby 45 barrel threaded 5/8 x 24.

This picture is of the same Fat Ghost showing the ejection port side with the gas deflector.

 

Video Coming Soon…

Happy Shooting!

Posted on

Production Baby Ghost Upper Receivers for the M11A1 .380 are now being produced

After months of waiting, we are pleased to announce that we are in the initial stages of producing and shipping the M11A1 – .380 SMG Baby Ghost Upper Receivers.  We are beginning to contact those on the wait list, so if you aren’t yet on the list, please email us ASAP at:  tina@macmachineguns.com .

Like it’s predecessor, The Grey Ghost, the Baby Ghost was designed by Mike McManus. This upper receiver is the perfect host for the Vegas SMG slow fire CF-W 9mmA Bolt .  It is completely made of steel with full length Picatinny Rail on top, an Ace Style grip out front, a flash hider with 9mm barrel threaded to 1/2 x 28 TPI, “shark fin” non-reciprocating charging handle, and built in gas deflector.  The cost of the “stock” Baby Ghost is $430.00 and is the top upper receiver in each of the pictures below.

Some of the customize-able options are below:

1.  Smaller (M11A1/380) size ejection port. Add $50.
2.  .380 barrel threaded 1/2 x 28.  Add $50
3.  Your own barrel such as a 3-lug. Subtract $30.
4.  3″ side accessory rail. Add $55.
5.  Low profile (round/cylindrical) charging handle instead of the shark fin.  Same price.
6.  Leave off the flash hider.  Subtract $5.

The picture below displays a couple of charging handle options available for the Baby Ghost.  The top upper receiver has the Shark Fin charging handle and the upper on the bottom has the Low Profile (Round/Cylindrical) charging handle.

The Baby Ghost Upper Receiver is created using an M11/9 size upper receiver.  Therefore it comes stock with the larger ejection port.  This picture below displays the Baby Ghost with either the large M11/9 size ejection port (Top Upper) or the optional smaller .380 size ejection port (Bottom Upper) which works well with the CF-W

9mmA bolts.

This picture below is of a customer’s Baby Ghost installed on hisM11A1 SMG.  Notice the folding stock.  It is an M11/9 Folding Stock that was custom ordered to fold to the left so that the longer length of pull (LOP) would not interfere with the gas deflector around the ejection port.  Yes, we can do this for you too, just ask us about it!

Video Coming Soon…

Happy Shooting!

Posted on

Two New Product Videos for the Uzi SMG

So you all know that we specialize in the MAC series sub machine guns. But did you also know that we also dabble with accessories, modifications, and repairs for the Uzi Semi and Full auto guns, as well? Below are two new videos demonstrating 2 of our products for the Uzi. One is the well known folding stock for the Uzi, and the other is for our Top Cover with Picatinny Rail to allow for optics on the upper receiver of the full sizedUzi. As always, we love to hear from you. Please like our videos and subscribe to our channel!

Happy Shooting…

Posted on

Under Barrel Rail Adapter for the M11/9 or M11A1 380

This is our under rail barrel adapter for the M11/9 or M11A1 380. Rather than using the MPA upper bolt holes, it clamps onto the barrel land making it compatible with most any upper. Also you do not have to take it off to remove your barrel. It sets the grip directly below the trunnion rather than behind it to allow further spacing between hands. Lastly, we’ve incorporated a blast shield above the grip. This is a brand new variant Sam designed this morning and will be available for purchase soon (hopefully this coming week). This will also be an option for the Grey Ghost Upper Receiver. It will be sold as a set – Ace vertical grip and adapter or as the adapter alone. Please let us know if you would like us to notify you when they are available.

 

 

Posted on

Grey Ghost Upper Receiver for the M11/9 SMG

Introducing the production version of the Grey Ghost Upper Receiver for the M11/9 SMG designed by Mike McManus. This upper receiver is the perfect host for the Vegas SMG slow fire CF-W Bolt or stock bolt.  It is completely made of steel with full length Picatinny Rail on top, an Ace Style grip out front, a flash hider with barrel threaded to 1/2 x 28 TPI, “shark fin” non-reciprocating charging handle, and built in gas deflector.  There is currently a wait list for this upper and as of the time of this post, we are shipping the first 10 out to customers.  If you would like to be added to the wait list, please contact us at:  sales@macmachineguns.com

Here are some pictures of customer customizations:

This one has a round and more compact charging handle and a customer supplied 3-lug double threaded barrel:

 

This one has a 3″ piece of picatinny rail welded onto the ejection port side of the upper receiver to accommodate additional accessories.  (The tape is on the end of the barrel to protect the threads during shipping because the customer did not want the flash hider as he will be shooting suppressed):

These two pictures below show the Uzi Style Folding Stock tucking under the fore grip extension.  If you watch the video below you will see toward the end of the video the folding stock with the stock arm welded to the other side of the butt plate to accommodate long uppers. 
Last but not least, here is a video showing the production upper as well as assembly instructions:


If you have any questions or comments, please be sure to let us know!

Happy shooting…

 

Posted on

Browse New Products On Our Site

We’ve been working on adding new products to our site so that we might offer our customers a bigger selection of MAC related items and tools.  Below is a list of items added recently:

Uzi magazines – Promag 22 rnd 45 acp and Parkerized Surplus 32 rnd .9mm mags

M11/9 or M11A1/380 magazines – Zmag 50 rnd .9mm or Zmag 30 rnd .9mm mags

Taps and Dies – Selection of Taps and Dies for re-threading uppers and barrels and/or cleaning up threads

Armorer’s Tool Set – This is a selection of items we put together to assist you when working on your MAC

Assault Grip Extension – This is a quick and inexpensive way to add length and a fore grip to the front of your MAC

We love to hear from you!  Don’t hesitate to contact us.

Happy Shooting…

Key words:  MAC Mac-10, M10, M10/9, M10/45, Cobray®, Ingram, Military Armament Corp., Jersey Arms Works, JAWS, Hatton Industries, Marshall Arms, MPA, Masterpiece Arms, M11, MAC-11, M11/9, M11A1, M11-380, Machine Gun, Guns, SMG, Repair, Practical Solutions, SWD, RPB, Lage, UZI, Grease gun, Zytel, Shockwave, Leinad

Posted on

New – Free or $4.99 Flat Rate Shipping

We just hate paying high shipping fees.  Especially when we feel like it’s unreasonable.  For example, just a couple of days ago, we bought $14 worth of fittings for the drip irrigation we are putting into our high tunnel (Because in addition to being machine-gunners, we are also wanna-be farmers) and the shipping was $13.  So almost half of the order was for shipping!  Now these pieces might take up some space in a box, but they are plastic and so don’t weigh very much.  I’m sure that the actual shipping the company pays to send us our box will be less then what we were charged.  

That’s it!  This was the straw that broke the camel’s back and we decided to change our own shipping pricing.

From now on, most of our items will qualify for free shipping via USPS First Class mail.  These items are the smaller items that will fit into a padded envelope.  We don’t want you to buy a $3.99 spring and pay $6.00 shipping – that’s crazy!  

All other items – those that will mail in a box and will have some weight to them will be shipped with a $4.99 flat rate shipping charge via USPS Priority Mail.

If for any reason you would like your items that qualify for free shipping to ship via Priority Mail as opposed to First Class, we would be happy to accommodate your needs, but we will charge the $4.99 flat rate shipping fee and please call in your order because our website is not smart enough to make this change.

Our pricing structure on all firearm shipping has not changed.  We will continue to charge the actual shipping fees we pay the common carriers.

Thank you so much for your continued business!

Happy Shooting…

 

Posted on

Now Buying Semi-Auto and/or Full-Auto Broken MACs, Registered Receivers, part sets, new or like new parts, magazines, and/or accessories for the MAC series semi-auto or full-auto machine guns.

Do you have a MAC open bolt semi-auto gun or full-auto machine gun that you want to sell?  Do you have one that is broken and just wasting space in the safe?  Did someone pass one down to you and you would rather have the money than the gun?  Do you have a registered receiver that was never built into a working gun?  Maybe you feel like your gun has been damaged beyond repair and you’d have just thrown it away years ago, but you just can’t bring yourself to do it.  Do you have part sets rusting away in your basement?  Do you have cases of grease gun, Zytel, Uzi, or Sten magazines that you don’t need?  Did you sell off your MAC and keep the accessories, but now you really don’t want them?

If any of the scenarios above sound like you then contact us.  We are now buying the guns that you don’t want.  Tell us your asking price and we will be happy to make you a reasonable offer and we will pay you in full as soon as we complete the transfer paperwork. 

We will only buy legal guns.  Please do not contact us if you have a full-auto gun that does not have paperwork.  We are not interested in contraband.

Please call or email us with what you have at:  410-404-0320 or sales@macmachineguns.com

Happy Shooting

Key words:  MAC Mac-10, M10, M10/9, M10/45, Cobray®, Ingram, Military Armament Corp., Jersey Arms Works, JAWS, Hatton Industries, Marshall Arms, MPA, Masterpiece Arms, M11, MAC-11, M11/9, M11A1, M11-380, Machine Gun, SMG, Repair, Practical Solutions, SWD, RPB, Lage, UZI, Grease gun, Zytel

Posted on

M10/45 Machine Gun For Sale

M10 right

Left side

This is a new Marshall Armaments M10/45 Full Auto Machine Gun.  We built this from a registered frame into a fully functional and reinforced gun that uses all the latest parts.  This will come with our Uzi style folding stock, paddle magazine release, and non reciprocating side cocking upper receiver.  The front sight is fully adjustable and the upper receiver also has a full length Picatinny Rail.  There are reinforced welds on feed ramp, and double welds at sight plate.  This is the last of this kind that we have for sale.  If you are interested in this beauty, please contact us for details and for pricing.