Category: News

We have a new manufacturer on standby, ready to make the bolts, provided we have enough interest. This is the 380 sized 100% tungsten bolt (not the hybrid bolt) that will run in either the M11/NINE or M11A1/380 guns in 9mm. As I stated previously, the previous manufacturer got back to us a couple of months ago with a current quote and it was a lot. I mean A LOT – and we didn’t like it at all. We’ve contacted some other companies and we have one that will make them and they are ready to go. This company sources their tungsten from the Americas. Mostly Canada, but some comes from South America – none of it comes from China. This company will also 100% manufacture them in the USA. These new bolts would be truly American made. This was not the case with the previous bolts and we are proud to say that our PS-W bolts will be made in the USA. At today’s pricing we are looking at a retail price of $1225. Like last time, we’ll be requiring a 50% non-refundable deposit. I’ll be sending emails out this week to those on the wait list to see who is still interested in the bolts at this price. If we can get enough people interested we’ll turn them on. So if you are on the wait list, please be on the look out for an email from tina@macmachineguns.com (sometimes my emails end up in the spam folder.) If you’d like to be proactive and shoot me a line of your interest level, that would be great, it’ll speed up the process.

We are happy to show off our prototype Folding Stock for the Micro Uzi.  Over the years, we’ve been asked too many times to count if our folding stocks are compatible with the Micro Uzi’s.  We’ve always responded by say “Yes” and “No”  Yes, in that they can be modified to work and no in that they will work fit out of the box, the stock would have to be modified.  The major dilemma being that Micro Uzi stocks were originally welded on, additionally, there is no where to mount an aftermarket stock.  So we’ve come up with a solution.  It will require modifying the back plate of the gun’s receiver by either drilling two holes which will allow the stock to be attached and easily removable or it can be welded on, which would obviously be a permanent option.  If you have questions please feel free to contact us or join the wait list here:  https://macmachineguns.com/product/folding-stock-for-the-micro-uzi/

Rare and Collectable – SWD M11/NINE 9mm SMG – Experimental Gun

This gun came from Wayne Daniels’ personal collection. The serial number “EXP 003” was used as a test gun and it came to us with a Sten type magazine well on it. It had definitely been tested as the front pin holes had been worn out. We have repaired everything on the frame and replaced all the fire control parts, stock and upper assembly with new parts bringing this gun back to what it was before any experiments. EXP 003 is definitely a piece of the MAC Series Machine Gun history helping to show case SWD’s innovations and willingness to think outside the box. This is not your run of the mill M11 machine gun. This is a gun for the serious collector that appreciates the history behind these firearms. Asking $20,000 shipped to your local dealer. Tennessee sales are subject to 9.25% sales tax.

This gun hasn’t been run since 1982 and only 2 mags were run through it at that point. Everything was bought as a package at the same time. We have not test fired the gun due to the low round count of the gun. We can test fire the gun if buyer wishes, but as far as we can tell, the gun appears to function correctly. We reparkerized the steel section of the suppressor, cleaned the baffles and replaced the wipes. The protective foam covers are there for both ends of the suppressor. Briefcase is and will remain unfired until buyer decides to shoot it. 2 RPB style Cobray marked mags come with the gun. Also included is the original manual/sales catalog. This gun/suppressor will transfer on form 4’s to buyers dealer of choice. Asking $17,000 plus shipping for the package any applicable taxes to be paid by the buyer. Please contact us for additional information.

We have exciting news! We just received our sample bolt, we assembled and test fired it and it ran right out of the box! See below for video and a picture of the bolt. Stay tuned…